|
Cutters.
Prices are subject to change without
notice, click on item for latest price!
|
 |
Benner Nawman DBD-25X Portable Rebar Bender maximum
capability of cutting #8 (1") and/or bending #7 (7/8") - 60 grade rebar.
Features:
- This fully mechanical bender can make 180 degree bends in
#7 (7/8") - 60 grade rebar in less than 6.
- The entire unit weighs less than 200 lbs. and can be run
off any AC generator drawing 12 amps (110v).
- This is a reliable workhorse for necessary rebar field
adjustment.
- Shown with optional stand and foot pedal.
|
 |
Virutex C015L Portable Handheld Plastic Laminate Slitter.
Features:
- Metric and Standard scale for easy adjustment of strip
width.
- Hand-held portable unit.
- Strip cutter for plastic laminates and veneers.
- Clean, splinter free cuts with no waste.
- Cutting thickness can be adjusted with a micrometer.
From the Manufacturer
Hand-held portable unit. Strip cutter for plastic laminates and veneers. Quick
and easy to use. Obtain a clean and splinter free cut with no waste. Cutting
thickness can be adjusted with a micrometer. A metric and inches scale can be
used for easy adjustment of strip width. The new and improved metal bracket made
of a special alloy provides stronger hold and stability for the guide fence. The
fence is also bolted at both ends for extra strength. The unit is also equipped
with a special lock knob assembly for a tighter locking metal bracket that holds
the fence. Micro metric fence adjuster will assure you a very precise
positioning. It will also lock the fence into a very tight position. Any
pressure from the operator will not move the fence out of alignment.
|
 |
Felker TS-40 Rubi Tile Cutter.
Features:
- Double walled anti-shock plastic case.
- Built in separator.
- Maximum cutting length of 17 inches and 9/16-inch maximum
separating capacity.
- Weighs only 18.2 lbs.
- Set includes standard scoring wheel punching tool, 45 deg
mitering tool.
From the Manufacturer
The quality of the Rubi line of tile cutters holds true in the TS-40. Features a
built in separator, maximum cutting length of 17 inches and a 9/16-inch maximum
separating capacity. Standard set includes standard scoring wheel punching tool,
45 degree mitering tool, and double-walled anti-shock plastic case. Weighs only
18.2 pounds.
|
 |
Tolman Tool OPEN-CB Rebar Open Cutter-Bender.
Features:
- Eliminates through-feed system.
- Cuts 5/8-inch, 40-grade rebar.
- Bends 3/4-inch, 40-grade rebar.
- View where you want to cut.
From the Manufacturer
This rebar cutter-bender eliminates the through-feed system and allows you to
view exactly where you want to make a cut. Cuts 5/8-inch-diameter 40-grade rebar
and bends 3/4-inch-diameter 40-grade rebar.
|
 |
Goldblatt Trowel Trade Tools GB07625 Re-Bar Cutterand
Bender.
Features:
- This Rebar Cutter-Bender is a combination
tool used for cutting and bending reinforcing steel up to and including 3/4"
diameter.
- Made of rugged cast iron construction with
a 54" steel handle.
- Shipped completely mounted on a sturdy 2"
x 8" x 5-1/2" long wood board.
- Built for heavy-duty use and saves hours
in work time.
From the Manufacturer
This Rebar Cutter-Bender is a combination tool used for cutting
and bending, reinforcing steel up to and including 3/4" diameters. It is made of
rugged cast iron construction with a 54" steel handle. This tool is shipped
completely mounted on a sturdy 2" x 8" x 5-1/2" long wood board. It is built for
heavy-duty use and saves hours in work time.
|
|
Please click here for more great Cutters.
|
