Pry Bars.

• Hole in center allows socket access to crankshaft pulley bolt.
• For removal and installation of crankshaft pulley bolt.
• Fits most Honda and Acura engines.
• Hexagonal shape fits hole in center of crankshaft pulley.
• Prevents engine from turning when held with breaker bar.

• 8 inch prybar included.
• For flexed or flush cutting.
• Pull-to-cut method faster/safer cutting.
• Pullsaw teeth have 3 cutting edges.
• Push button system blade changing.

Amazon.com
If you've never used a pull-saw, you're probably wondering if everything you've heard about them is true. It is, especially when you're talking about this handsaw from Shark. The ancient Japanese concept of pulling to cut gives you maximum results from minimum effort. Everything about this Shark is top-notch: the shape of the teeth, thickness, balance and the coordinated angle of the teeth, blade, handle, and blade replacement system. Because these blades cut on the pull rather than the push, the blades can be thinner, lighter and more flexible than regular saw blades, and flexibility means flush cutting. The cut is uniformly accurate, clean and easy to start, and you're left with a super-thin kerf. The blade is nice and wide, so you can fearlessly guide it with just a thumb. Something about the angle of the teeth seems to clear debris better than a standard saw, too. Add to this awesome saw the pry bar that comes with it, and you cannot beat this set. We love the bar for its ultra-sharp chiseled edge and the curve that gets you into the tightest spots. It's certainly the thinnest flat bar we've seen, great for prying off trim and molding with virtually no damage to the surrounding wall or the molding itself. We can imagine putting this to good use as a paint scraper, staple and nail puller, carpet remover, tile remover… the list goes on and on. We are impressed.--Kris Jensen-Van Heste
 

• Limit one pry bar per order.
• Tempered steel with nickel plated finish.
• Tempered steel with nickel-plated finish for durability.
• Tempered steel.
• Nickel plated finish.

Product Description:
7" length for light-duty work. Beveled nail pulling slots. Ideal for pulling nails, prying, lifting, and scraping. Tempered steel. Rust-resistant nickel-plated finish.

• Three beveled nail slots; polished sharp blades for easy insertion.
• Essential tool for homeowners or tradesmen.
• 15" length provides excellent leverage.
• "Shepherd's crook" rocker head is designed for maximum prying power.
• Forged, spring tempered steel for heavy duty use.

 From the Manufacturer
B215 Original SuperBar is an essential tool for homeowners and tradesmen. "Shepherd's Crook" rocker head design for maximum prying power; 15" length provides excellent leverage. Useful for prying molding, scraping and pulling nails. Forged, spring tempered steel for heavy duty use. Three beveled nail slots; polished, sharp blades for easy insertion.

Product Description:
Forged, spring tempered steel for heavy-duty uses. Rocker head provides maximum leverage. Beveled nail pulling slots. Pries, scrapes, pounds and pulls. 24 oz. 15" long. 4 per box.

• Measures 8 inches.
• High-quality carbon steel.
• Thinnest blade on market.
• Pries into tight spots.
• Removes any nail.

 From the Manufacturer
This pry bar and nail puller is made with high-quality hardened steel alloy and the thinnest blade available on the market. It will pry into any tight spot with ease, doing less damage to wall and molding surfaces. The curve of the blade is designed to lift molding easily with a turn and is so sharp it removes any nail, even very small and no-head nails, lodged in the wall or any other material.

Please click here for more great PRY BARS.