|
Air Compressors.
Prices are subject to change without
notice, click on item for latest price!
|
 |
Makita MAC2400 2.5 HP TwinStack Air Compressor.
Features:
- Roll bar handle for portability and added protection
against harsh jobsite environments.
- High rated 4.2 CFM @ 90 PSI, with only a 13 amp draw.
- The low 1720 rpm is half that of most competitive units,
resulting in greater motor and pump life, and the substantially lower noise
level makes it the quietest compressor in its class.
- Large cast iron pump with automotive style cylinder and
piston deliver maximum performance.
- Oil lubricated for cooler running pump and an automotive
style air filter for easy, low-cost maintenance.
From the Manufacturer
The new MAC2400 - Twin Stack air compressor by Makita is blowing away the
competition. With built-in features such as a super quiet motor that draws only
12.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter
system like no other, its easy to see how this unit will out last and outperform
everyone else. It delivers 4.2CFM @ 90PSI and is equipped with a lever handled
ball valve drain system to get rid of condensation build up in the tank . The
exclusive finned discharge tubing increases heat dissipation while reducing
moisture in the lines and the easily removable cast iron cylinder reduces wear
for increased pump life. High quality, maximum performance - just what you
expect from Makita.
|
 |
Makita MAC700 2 HP Air Compressor "The Hot Dog".
Features:
- Roll bar handle for portability and added protection
against harsh jobsite environments.
- High rated 3.3 CFM @ 90 PSI.
- The low 1720 rpm is half that of most competitive units,
resulting in greater motor and pump life, and the substantially lower noise
level makes it the quietest compressor in its class.
- Large cast iron pump with automotive style cylinder and
piston deliver maximum performance.
- Oil lubricated for cooler running pump and an automotive
style air filter for easy, low-cost maintenance.
From the Manufacturer
The new MAC700 - Hotdog compressor by Makita is blowing away the competition
with built-in features such as a super quiet motor that draws only 12.4 amps to
operate. It's easy to see how this unit will out last and out perform everyone
else in its class with 3.3CFM @ 90PSI and a lever handled ball valve drain
system to get rid of condensation build up in the tank . The exclusive finned
discharge tubing increases heat dissipation that reduces moisture in the lines
and the easily removable cast iron cylinder reduces wear and increases pump
life. The heavy duty roll cage construction provides extra protection against
the harsh jobsite environments. High quality, maximum performance - just what
you've come to expect from Makita.
|
 |
Porter-Cable C3551 Job Boss 4.5 Gallon, 150 PSI, Oil-Lube
Mobile Compressor.
Features:
- 120 V/ 60 hertz/1 phase motor.
- 2.5 hp single tank air compressor.
- Oil-lube air compressor for maximum durability.
- 150-PSI tank pressure for longer tool run time.
- Quiet motor is easy on eardrums.
From the Manufacturer
Why lift when you can roll? The Job Boss Compressor comes equipped with a
mobility kit for job site portability. In addition, this 2.5HP (peak), 4.5
gallon, Oil-Lube contractor style compressor is packed with features you’ll
like. A cast iron oil-lube design and 8 oz. oil capacity mean increased
durability and a longer lasting machine that won’t let you down. A 150-PSI tank
will get you through those extended jobs. The High-flo air regulator and 2-port
removable console are winning combinations for contractors looking for
performance and versatility. This compressor is designed with a removable
console for maximum mobility and air pressure. The pump and motor are protected
by a full roll cage.
|
 |
DEWALT D55155 2-3/4 Max HP 4 Gallon Hand Carry Electric
Compressor.
Features:
- 4.5 cfm.
- Dual soft start valves assist in cold weather start up.
- Cast iron cylinder enhances pump life.
- Oil lubricated pump allows for long life.
- ASME coded 4-gallon OSHA recognized tank.
From the Manufacturer
This 4-gallon hand-carry compressor was designed to meet the tough demands of
the job site. The handle is situated to allow the user to carry the compressor
with one hand in a natural walking position. The D55155 is overload-protected,
delivers 4.5 cubic feet per minute at 100 psi, and draws less than 15 amps. The
roll cage and integrated instrument panel protect the compressor and instruments
from damage. The panel houses two large, easy-to-read gauges, a regulator, and
two quick-couplers. Other features include a ball-type tank drain design and a
wrap area for securing the power cord. The 4-gallon tank is ASME-approved and
CSA-certified. Comes with the initial fill of DeWalt's synthetic air compressor
oil.
|
 |
Senco PC1010 1/2 HP 1 Gallon Mini Air Compressor.
Features:
- Aluminum cylinder.
- Weighs only 20 pounds.
- Ultra quiet operation.
- 1/2 HP 1 gallon capacity.
- Comfortable cushioned handle grip.
From the Manufacturer
The PC1010 is Senco's lightest poratable air compressor. Don't be fooled bt the
PC1010's small size and weight. It packs a punch! Targeted primarily at finish
and trim applications, the PC1010 has sufficient air volume to drive 18-gauge
brad nails at over 20 drives per minute. Of course, the PC1010 can also be used
with a wide range of other pneumatic tools.
|
|
Click here for more great AIR COMPRESSORS.
|
