JOINTERS.

• 1 HP, 120/240-volt induction motor.
• Enclosed stand, dust collector connector.
• Center-mounted fence, 3-knife cutterhead, cutterhead guard, push blocks.
• Five year limited warranty on machines, parts and accessories.

From the Manufacturer
Delta X5 Model 37-275X 6" Professional Jointer includes a 1 HP, 120/240V, induction motor; enclosed stand, dust collector connector, center-mounted fence, 3-knife cutterhead, cutterhead guard, push blocks and instruction manual.

• 2-year limited warranty on machines, parts, and accessories.
• Heavy duty 3/4-horsepower, 115/23-Volt, single-phase induction-type motor.
• Cast iron wedge bed design for solid support with fully adjustable infeed and outfeed tables that operate on gibbed dovetail ways to compensate for wear.
• Lever-actuated infeed table, with lock handle, for quick, easy height adjustment.
• Removable on-off switch to prevent unauthorized use of machine.

 From the Manufacturer
Power and precision at an affordable price. This deluxe 6-inch jointer has a powerful 3/4-horsepower induction motor for smooth cutting action. The cast iron, wedge bed design has precision machined, dovetailed ways with adjustable "gibs" to adjust for wear. Precision-ground infeed/outfeed tables span 46 inches in length and 6 inches in width--ideal for handling long, large stock. The 2-1/2-inch diameter, three-knife, ball-bearing cutterhead powers through stock at 4800 rpm, producing 14,400 cuts per minute for a smooth finish. The infeed table is easy to adjust with the convenient raising and lowering lever and easy to read scale. This model also has a large, factory set, cast iron fence with positive stops at 90 and 45 degrees, and tilts 45 degrees in and out.

• Made with pride in the USA.
• Given the "Top Product" award by Wood Magazine.
• The Only All In One Maintenance Kit.
• The ToolSaver™ system makes the entire machinery, tooling and equipment maintenance process easier than it has ever been.
• A $40 value for under $25.

 From the Manufacturer
ToolSaver complete tool care system - This eye-catching kit consists of five 2-ounce products that will provide the worker with everything needed to perform complete maintenance on shop tools and equipment both new and old. Includes TopSaver all-in-one cleaner, rust remover, rust preventive, and lubricant; BladeSaver-the pitch eliminator-saw blade and router bit cleaner; OptiCut XL saw blade lubricant.

• 2-year limited warranty on machines, parts, and accessories.
• 10-amp, 120-volt motor for smooth, powerful cutting action.
• Center-mounted fence adjusts quickly and easily for less down time.
• Easy to adjust infeed table for fast set up.
• Extra large table to support stock up to a full 6" wide.

 From the Manufacturer
Removes imperfections from the edges and faces of stock to make it straight and true. Designed for the home workshop, the new Delta variable speed jointer offers performance features and capabilities even a professional woodworker can appreciate. Variable 6,000-11,000 rpm speed ranges with handy speed selection chart that allows you to select the right speed for the application. The easily adjustable, center-mounted fence allows quick set up, even for angled jointing up to 45 degrees. A ball-bearing cutterhead with jackscrew blade adjustment provides smooth operation and easy blade changes. A built-in cutterhead lock also aides in blade changes, preventing the cutterhead from turning. The conveniently located infeed table raising and lowering knob and an easy-to-read scale make adjustments easy.

• Roll hem with rubberized magnets on each corner.
• Measures 56 by 72 inches, ideal for tablesaw, shapers, planers and jointers.
• Rugged cotton sheathing with plastisol coating.
• Plastisol coated.
• Breathable, yet water resistant.

 From the Manufacturer
This machine cover protects your investment from performance-threatening condensation and rust, as well as harmful moisture, dust, and other workshop elements. These unique covers are made of rugged cotton sheeting that's scientifically coated with a special plastisol, with thousands of microscopic holes that allow it to breathe yet remain water resistant. The fabric is roll-hemmed around the entire perimeter, with a rubberized magnet sewn to each corner.

• Dust collection system built in.
• Adjustable cut depth on infeed table.
• 2-blade cutterhead with HSS blades for optimal cutting efficiency.
• Easy to replace blades can also be re-sharpened for like-new cutting efficiency.
• Solid cast iron bed and fence for true cuts with minimal vibration.

 From the Manufacturer
This 6-1/8" Benchtop Jointer from Palmgren is a workhorse. The cutterhead uses HSS blades for longer life while the cast iron fence, infeed & outfeed tables provide stability, true cuts, and long life. Palmgren Jointers provide professional features and performance in a compact package. Joint and plane hardwoods or softwoods up to 6.125". All work surfaces are ground for smooth , precise operation and the fence system slides across the table to use the entire width of the cutting blades. The fence & fence guide can be quickly adjusted from 45 degrees inward to 45 degrees outward, with positive stops at 45 & 90 degrees for bevel & chamfer cuts. The infeed table adjusts for cut depths up to 1/8”. This tool features DustUp, the patented dust collection system that is built in. DustUp, found only on Palmgren woodworking tools, collects chips and wood debris into a 30 gallon trash bag or can (not included). This feature results in almost no cleanup! A large, locking paddle switch helps prevent unauthorized use. This tool is CSA/CUL certified. Pre-drilled holes in base for mounting to bench or stand. Specifications: table size 28.5" x 6.25"; fence size 22.5" x 3.75"; blade width 6.125"; max cut depth .125" (one-eighth inch); cuts per min 20,000; overall size 28.5" x 18" x 12" (height); dust collection port 2.5" dia; motor 1 HP, 12 amp, 120v.

• Precision machined for best results.
• Premium high speed steel.
• Covered by Freud's limited lifetime warranty.

From the Manufacturer
Freud Industrial Planer and Jointer Knives are made from premium high speed steel stock for the keenest edge and longest life. They come pre-ground to a razor sharp edge for the smoothest cut. Covered by Freud's Limited Lifetime Warranty.

Click here for more great JOINTERS.