|
Power Tool
Combo Packs. Prices are subject to change without
notice, click on item for latest price!
|
 |
DEWALT DC6KITA 18-Volt, 6 Tool Cordless Combo Kit.
Features:
- 1/2-inch drill/driver/hammer-drill with 500 in.-lbs. of
maximum torque for heavy-duty applications
- 6-1/2-inch circular saw cuts 2- x 4-inch stock at 45
degrees in a single pass for speedy framing, decking and more.
- Reciprocating saw with keyless blade clamp for quick
blade changes.
- Ultra-light, 4-1/2-inch long right angle drill delivers
310 in.-lbs. of torque for ample power in very tight quarters.
- Kit also features a cut-off tool for cutting and
grinding, a flexible neck flashlight and more.
From the Manufacturer
The DC988 18-volt 1/2-inch adjustable clutch hammerdrill/drill/driver uses a
DEWALT built high-torque motor to deliver 500 in.-lbs. of torque for drilling
bigger holes and driving larger screws. The 3rd speed is 38-percent faster, with
a range of 0-2,000 rpm and 0-34,000 bpm. The DC988 features a 1/2-inch metal
ratcheting chuck with carbide jaws to keep a tighter grip on the bit. The DC385
reciprocating saw has a keyless blade clamp and cuts 80 two-by-fours on one
charge. The DC390 6-1/2-inch circular saw has the power to cut over 100
two-by-fours on one charge. It has a left-side blade for visibility, 50-degree
bevel and includes a rip fence. The DW960 right angle drill is only 4-1/2
inches, designed to fit into tight spaces. The DC410 includes both cutting and
grinding guards and wheels. The DW919 has a flexible neck that allows the beam
to be pointed in any direction. The DC6KITA combo kit includes the hammerdrill
with 360 degree side handle, circular saw with blade and rip fence,
reciprocating saw with blade, right angle drill, cut-off tool with grinding
wheel and guard, cutting wheel and guard, flanges and wrench, flexible
floodlight, two screwdriver bits, two XRP batteries, one-hour charger, and
contractor bag.
|
 |
Porter-Cable CFFN250N Finish & Brad Nailer Combo Kit.
Features:
- 135 psi, 2hp, 6 gallon pancake style compressor.
- 300 PSI, 25' vinyl air hose, one air hose fittings (1/4"
male plus & coupler), and pipe joint tape.
- Finish any woodworking project with this limited edition
kit.
- 16 gauge, 3/4"–2-1/2" finish nailer (model FN250B).
- 18 gauge, 5/8" –1-1/4" brad nailer kit (model BN125A).
Product Description
Features: BRAD AND FINISH NAILERS * Brad nailer kit (BN125A): Uses 18 gauge,
5/8" to 1 1/4" brad nails * Finish nailer kit (FN250B): Uses 16 gauge, 3/4" to 2
1/2" finish nails * Features include adjustable depth-of-drive, jam release
mechanism & non-marring nose tip * * 6 GAL. PANCAKE COMPRESSOR * 10 Amp, 120 VAC
* Oil-free design for less maintenance * Ability to run on standard household
current * 3.7 SCFM @ 40 PSI - 2.6 SCFM @ 90 PSI * Standard Equipment: Nailers
#BN125A & #FN250B & cases, 2,000 fasteners, oil, 6 gallon compressor, 25' air
hose, 1/4" industrial plug, 1/4" coupler, pipe joint tape & operating manuals.
|
 |
DEWALT DC5KITA 18-Volt, 5 Tool Cordless Combo Kit.
Features:
- DC988 18-volt XRP 1/2" hammerdrill/drill/driver with 500
in-lbs of maximum torque and patented 3-speed all-metal transmission.
- DC390 18-volt circular saw with 6 1/2", 16-tooth carbide
blade and rip fence can cut 2x4's at a 45 degree angle in a single pass.
- DC385 18-volt cordless reciprocating saw with keyless
blade clamp allows for quick blade change without touching blade or
reciprocating shaft.
- DC330 variable speed jig saw accepts both universal and
T-shank blades.
- DW919 18-volt flexible floodlight for hands-free use.
Product Description
18V, 5 Tool Kit, Includes DW988 1/2" Hammer Drill/Drill/Driver With 500 in-lb
Maximum Torque & Exclusive 3 Speed All Metal Transmission, DC390 Circular Saw,
With 6-1/2", 24 Tooth Carbide Blade & Rip Fence, Can Cut 2x4s At 45°ree. Angle
In Single Pass.
|
 |
Senco PC0974 Finish Pro 10 Micro Pinner and Compressor Combo
Kit.
Features:
- Compressor generates a maximum air pressure of 120 psi.
- Drives 23 gauge pins in lengths of 1/2"-1" creating a
nearly invisible hole.
- Comes with a metal magazine for added durability.
- Designed with a rubber rear bumper to protect wood
surface.
- 1/2 hp, 1 gallon oil-less compressor includes a tank pressure gauge and
an outlet pressure gauge.
From the Manufacturer
The Senco PC0974 kit provides the perfect tools for all your intricate finish
and trim projects and at a great price. The FinishPro10 micro pinner is great
for fastening fine moldings, woodworking projects, and craft making. It also
includes Senco's ruggedly designed PC1010 oil-less micro air compressor that
weighs just 20 pounds. The lightweight FinishPro 10 Micro Pinner is the perfect
tool for all of your intricate finish and trim remodeling projects. The micro
pins fasten the smallest of decorative trim securely and leave a nearly
invisible hole--no splitting or puttying.
|
 |
Hitachi 725297 Framing Nailer with 2 HP Compressor Combo
Kit.
Features:
- 50 foot hose included.
- Combo kit includes nailer, compressor, hose, fittings and
oil.
- Most dependable NR83A shoots 2- 3 1/4" full round head
plastic collated fasteners.
- 2 HP oil-bath stack tank compressor.
- 14.5 amp compressor.
From the Manufacturer
Here is a great opportunity to save some money on 2 of Hitachi's most popular
items. This combo kit includes theNR83A framing nailer along with the EC12
oil-bath stack tank compressor. Also included are the fittings, tape, oil and 50
feet of pneumatic hose. The pwerful and dependable NR83A shoots full round head
framing strip nails from 2"-3 1/4". This light weight tool can fire up to 3
nails per second. The EC12 compressor is a 2 HP unit that delivers 4.1 cfm at 90
psi. This oil lube compressor draws only 14.5 amps and max RPM is 3,450.
|
|
Click here for more great COMBO PACKS.
|
